Splicer-1000 “Dagger” Starship Registry

Splicer-1000 Over Optimus Teg, UCSBA-13

Starship Registry Data

Name:
Splicer 1000 MK. 9 "Dagger"
Class:Light/Recon Fighter/Trainer
Manufacturer:Splicer Corp.
Mass:3.28 Tonnes
Length:37.96 Metra
Span:26.61 Metra
Height:6.33 Metra
Engines:
Thrust (max-torch):
3-T* Plasma Engines (Mk.9)
13.61-40.8 G-Tonnes each
Power Plant:2- Photon Energizers
Max Acceleration:8.3G
Afterburner Acc:24.9G
Max G Load:34.5G
Hyperspace:No
Max Yaw/Pitch/Roll Rates:75/120/150 DPS
Shields (Fore/Aft):
60/60 DSR
Armor (Fore/Aft/Flank):12/13/12 HAR
Weapons:2: C-8 Plaser
2: Q-12-C EPC
Missiles:2:3 XAM-27X Missile Launchers
4: External Hardpoints
Torpedoes:None
Decoys:26 Standard Type
Transatmospheric:Yes
Crew:1
Cargo:Light
Craft Compliment:N/A
Duration:20 Decs
SSD Class:L

The first Splicer 1000s came into service shortly after the war between the UCSB and Galactic Federation began.  Originally classified as a superiority fighter, technological advances forced them to be reclassified as light fighters.  In service craft are used primarily for light escort, reconnaissance, and training.  The reconnaissance variant carries advanced sensor systems in place of its weapons as well as enhanced engines and expanded fuel cells.  Splicer 1000 trainers originally featured a second seat for the instructor pilot.  Newer models and those pulled from fleet service to be used as trainers feature the Remote Control Override System (RCOS).  This advancement allows an instructor to take over the craft from a remote position.  The RCOS requires minimal signal latency and strong signal strength, mandating that the control station be relatively close and in safe territory.

“Every pilot starts out flying the Splicer 1000.  The little craft are so plentiful and forgiving that when they were pulled from frontline service there was no better place for them then as trainers.  Even though most pilots eventually progress beyond the 1000 most still hold a place in their hearts for the craft,” Admiral Jolian Sares.

Splicer Corp Model 1000 Mk.9
All Environ Light Fighter/Trainer
“Dagger”
UCSBA-13 Training Squadron 11

Registry Key:

1- SSA-315J Omnidirectional Sensor Pod x2
2- Electromagnetic Impulser Thrust Control Array (typ)
3- Q-12 Electron Particle Cannon (EPC) x2
4- T-8 Plasma Drive Reverse Thrust Maneuvering Vanes/Atmospheric Drag Reduction Cover
5- T-8 Plasma Drive Primary Thrust Control Ring
6- ESG-164N Shield Generator
7- External Ordnance Hardpoints x4
8- XAM-27X Missile Launcher Port 3×2
9- Main Landing Gear/De-Grav Generator x2
10- C-8 Plaser Cannon (600rds) x2
11- Nose Gear/De-Grav Generator
12- XAM-27X External Missile Pallet
13- Cockpit (Single Seat)
14- SSA-316I Omnidirectional Sensor Pod x2
15- Vertical Stabilizer x2 (UCSBA-13 Markings)
16- SSA(T)-312K Forward Sensor Array (Targeting)
17- Stellar Hydrogen Intake/Thermal Exhaust Vent x2
18- Thermal Exhaust Vent x2
19- Docking Claw Attachment/Umbilical Hardpoint x2
20- MSP-27C Missile Simulator Pods
21- T-8 Plasma Drive x2

Detailed Images

Cockpit (thru canopy)

Cockpit Main Control Panel and Heads Down Display (HDD)

T-8 Plasma Engine and Thrust Vector Ring

T-8 Plasma Engine with Intake/Thermal Port, Docking Latches and Q-12 EPC

Cockpit and T-8 Intake/Thermal Radiator Array

External Hardpoints with Missile Simulator Pods (MSPs), Thrust Arrays and Internal Missile Launcher, C-8 Plaser Pack Forward

T-8 Plasma Engine Reverse Thrust Port (open)

Example Color Schemes

 

Comments are closed